Specifications

A ICA and RDP Connection
Parameters
This appendix provides the supported parameters that you can use for ICA and RDP
connections.
Parameters for ICA and RDP Connections
Table 4 contains the supported parameters you can use for ICA and RDP connections
(after Connect=ICA or Connect=RDP). Parameters with bold values (defaults) are
required parameters for an ICA or an RDP connection (those parameters without bold
values are optional).
Note
Any parameter in Table 4 that is used in a {username}.ini file will return to the
value set for that parameter in the wnos.ini file after a user sign-off. For
example, if your {username}.ini file contains the parameter Reconnect=yes
(so that a lost connection will restart 20 seconds after disconnection) and you
sign off of the thin client, then the Reconnect value will return to the original
default value of no (Reconnect=no) contained in the wnos.ini file
—so that
others who sign in can use their own “user profile” (assuming the
administrator has not changed the default values in the wnos.ini file).
Parameters in Table 4 noted with *** are required.
Table 4 Parameters for ICA and RDP connections
Parameter
***
Required
Description
Alternate=[no, yes] ICA Only. Yes/no option to use an alternate IP address returned from an
ICA master browser to get through firewalls.
Autoconnect={0 to 99} Use for automatically starting a session (after sign-on, if sign-on is enabled).
The value of 0-99 is the delay in seconds before auto-starting the session.
AppendUsername=1 This enhancement allows user names to display in the title bar of an ICA
session at the client side. To get the full benefit of this enhancement, add
the line to the parameter list. [Introduced in build 6.3.0_27]
Browserip=list of browsers ICA Only. List of IP addresses or DNS registered names to specify ICA
browsers. List items must be separated by semicolons or commas.