Specifications

WNOS INI and {username} INI Parameters 33
**ScreenSaver={0, 1, 5, 10, 15, 30, 60,
120, 180}
[LockTerminal={0, 1, 2}]
[Type={0,1, 2}]
[Image=imagefile]
Screensaver — Specifies to put the thin client in a screensaver state when
the time limit for inactivity (delay before starting) is reached.
Value and delay before starting the screensaver:
0 — Disabled
1 — 1 Minute
5 — 5 Minutes
10 — 10 Minutes
15 — 15 Minutes
30 — 30 Minutes
60 — 1 Hour
120 — 2 Hours
180 — 3 Hours
LockTerminal — Specifies the thin client LOCK state function when the
screen saver is activated.
0 — Disabled
1 — Puts the thin client in a LOCK state when the screen saver is activated.
The user will be prompted with an unlock dialog box to enter the sign-on
password to unlock the thin client. LockTerminal settings will be saved into
NVRAM if LockTerminal=1 and EnableLocal=yes is set in the wnos.ini file.
2— Puts the thin client in a LOCK state when the screen saver is activated,
however, the unlock dialog box cannot be viewed and the desktop will use
Blank the Screen as the screensaver.
NOTE: The user must be signed on with a password for a Lock action to
take effect.
NOTE: If set in KeySequence, users can lock the thin client at any time by
pressing Ctrl+Alt+Left Arrow or Ctrl+Alt+Right Arrow.
Type — Specifies which type of screensaver to use.
0 — Blank the Screen
1 — Flying Bubbles
2 — Moving Image
Image — Specifies an image file residing in the subfolder bitmap (under the
home folder) to use as a screensaver Moving Image.
NOTE: If Type=2 and no image file is specified, then the default Wyse logo
image is used.
Table 3 Parameters for wnos.ini files and {username}.ini files , Continued
Parameter
*
Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description