Specifications

WNOS INI and {username} INI Parameters 31
**PRIVILEGE=[None, Low, High]
[LockDown= {no, yes}]
[HideSysInfo={no, yes}]
[HidePPP={no, yes}]
[HidePN={no, yes}]
[HideConnectionManager={no, yes}]
[EnableNetworkTest={no, yes}]
[EnableTrace={no, yes}]
[ShowDisplaySettings={no, yes}]
[EnableKeyboardMouseSettings=
{no, yes}]
[KeepDHCPRequestIP={no, yes}]
Privilege controls operator privileges and access to thin client resources.
None — This level of access is typical for kiosk or other restricted-use
deployment. The System Setup selection on the desktop menu is disabled
(the Setup submenu cannot be displayed). The Connect Manager is
disabled by default (the Connect Manager can be enabled/visable by using
the HideConnectionManager=no option, however, the user cannot create a
new connection or edit an existing connection). The user cannot reset the
thin client to factory defaults.
Low — This level of access is assigned to a typical user. The Network
selection on the Setup submenu is disabled (the Network Setup dialog box
cannot be opened). The user cannot reset the thin client to factory defaults.
High — This administrator level of access allows all thin client resources to
be available with no restrictions. The user can reset the thin client to factory
defaults.
NOTE: If None or Low is used, the Network Setup dialog box is disabled. If it
is necessary to access this dialog box and the setting None or Low is not
saved into NVRAM, remove the network connector and reboot.
LockDown — Yes/no option to allow lockdown of the thin client. If yes is
specified, the system saves the privilege level in flash. If no is specified, the
system clears the privilege level from flash to the default unlocked state.
CAUTION: If the thin client is set to LockDown without a High privilege level,
it will disable the G key reset on power-up.
NOTE: LockDown can be used to set the default privilege of the thin client.
For example, if LockDown=yes, then the privilege is saved in permanent
registry; if LockDown=no, then the privilege level is set to the default high in
the permanent registry. That is, the system has a default high privilege level,
which is stored in the permanent registry; if you do not specify a privilege in
either the wnos.ini file or the {username}.ini file or the network is
unavailable, the setting of LockDown will take effect. It can be modified by a
clause. For example, privilege=<none|low|high> lockdown=yes in a wnos.ini
file or a {username}.ini file sets the default privilege to the specified level.
HideSysInfo — Yes/no option to hide the System Information from view.
HidePPP — Yes/no option to hide the Dialup Manager, PPPoE Manager,
and PPTP Manager from view.
HidePN — Yes/no option to hide the PNAgent or PNLite icon from view on
the taskbar.
HideConnectionManager— Yes/no option to hide the Connect Manager
window from view.
NOTE: As stated earlier, although the Connect Manager is disabled by
default if Privilege=none, the Connect Manager can be enabled (visable) by
using HideConnectionManager=no (however, the user cannot create a new
connection or edit an existing connection).
EnableNetworkTest — Yes/no option to enable the Network Test.
EnableTrace — Yes/no option to enable trace functionality (active items are
added to the desktop right-click menu in Privilege=High level).
ShowDisplaySettings — Yes/no option to enable the Display Settings in a
popup menu.
EnableKeyboardMouseSettings — Yes/no option to enable the keyboard
and mouse configuration preferences.
KeepDHCPREquest — Yes/no option to keep the same IP address that is
requested from the DHCP server after a request fails and does not invoke
the Network Setup dialog box.
Table 3 Parameters for wnos.ini files and {username}.ini files , Continued
Parameter
*
Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description