Specifications

WNOS INI and {username} INI Parameters 29
NetworkPrinter=host/queue
[PrinterID=Window driver name]
[Enabled={no, yes}]
NetworkPrinter — Specifies the configuration for the network (LPD) printer
in the same way as described for the Printer Setup dialog box in the WTOS
Users Guide. The host and queue parameters define the IP address and
queue name of the printer.
PrinterID — Specifies the Windows printer driver name.
Enabled — Yes/no option to enable the network (LPD) printer.
**NoReducer={no, yes} Yes/no option to turn off compression.
**Password=sign-on password Specifies the password as the sign-on password.
In a wnos.ini file - If set to the default password, the system will sign on
automatically and not wait for username, password, and domain entries.
In a [username].ini file - Be sure it is the encrypted password of the user or
the system will fail to sign on. This can be changed by a user, if allowed, in
the Sign-on dialog box.
PnliteServer=List of {IP address, DNS
names, or URLs}
[ReconnectAtLogon={0, 1, 2}]
[ReconnectFromButton={0, 1, 2}]
[AutoConnectList={*/
appname1;appname2;
appname3...}]
PnliteServer — Specifies the list of IP addresses or host names with
optional TCP port number or URLs of PNAgent/PNLite servers (by default
the list is empty).
Each entry with optional port is specified as Name-or-IP:port, where :port is
optional; if not specified, port 80 is used as the default. If a port other than
80 is used, the port number must be specified explicitly with the server
location in the form IP:port or name:port. Once specified, it is saved in the
non-volatile memory.
The statement PNAgentServer and Web interface for Citrix MetaFrame
Server is equal to this statement.
NOTE: PnliteServer and the DomainList parameters can be used in a
{username}.ini file, but generally are used only in a wnos.ini file.
NOTE: The PNAgent/PNLite server list and associated domain list
optionally can be entered in DHCP server options 181 and 182,
respectively. If entered in both places, the entries from this Table 3,
"Parameters for wnos.ini files and {username}.ini files," will take
precedence. However, the {username}.ini file will override the wnos.ini file if
the identical parameters with different values exist in the {username}.ini file.
NOTE: When Multifarm=yes, use # to separate failover servers, and use a
comma (,) or a semicolon (;) to separate servers that belong to different
farms.
ReconnectAtLogon — Specifies the reconnection function at log on.
0 — disables the option
1 — reconnects to disconnected sessions only
2 — reconnects to active and disconnected sessions
ReconnectFromButton — Specifies the reconnection function from the
reconnect command button.
0 — disables the option
1 — reconnects to disconnected sessions only
2 — reconnects to active and disconnected sessions
AutoConnectList — Specifies the PNA applications that will be automatically
launched when using PNA to sign on. If AutoConnectList=*, then all the
PNA applications will be automatically connected.
Table 3 Parameters for wnos.ini files and {username}.ini files , Continued
Parameter
*
Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description