Specifications

WNOS INI and {username} INI Parameters 23
**Desktop=bitmap file
[Layout={center, tile}]
Desktop — Specifies a bitmap file to be used as wallpaper for the local
desktop. This file could be a 4-bit, 8-bit, or 24-bit BMP file or a standard GIF
file or a standard JPEG file. The file must be located in the FTP server
wnos\bitmap directory. Default is no wallpaper.
Layout — Specifies the arrangement on the desktop background of the
bitmap file specified by the Desktop parameter. For the tile section, the
image is replicated across the desktop. If auto dial-up is set, it will be invalid.
Device=audio
volume={low, middle, high} or {0 to 25}
mute={0, 1, 2}
Device — Specifies the local audio volume.
volume — low is minimum volume, middle is medium volume, and high is
the maximum volume. The values between 0-25 allows you to set the exact
volume level.
mute — Selects the volume Mute check box in the GUI (you can also select
the volume Mute check box by using the GUI). If mute=2 is set it will disable
audio and system beep.
*Device=Ethernet
[Speed={Auto, 10M HD, 10M FD, 100M
HD, or 100M FD}
[MTU=mtu]
Device — Specifies to use an ethernet.
Speed — Specifies the ethernet speed to either Auto, 10M HD, 10M FD,
100M HD or 100M FD. If Speed is set in a wnos.ini file, the Speed statement
in the {username}.ini file will be disabled.
NOTE: Device and Speed parameters can be replaced by the the
EthernetSpeed parameter.
MTU — A maximum transmission unit value between 500 to 1500.
CAUTION: If the Speed parameter value is changed, the thin client will
require a reboot.
**Device=keyboard
[numlockoff={no, yes}]
[repeatrate={0, 1, 2}]
[repeatdelay={0, 1, 2, 3, 4, 5, 6, 7}]
Device — Specifies the local keyboard.
numlockoff — Yes/no option to turn off the NumLock of the keyboard.
repeatrate — Specifies the keyboard repeat rate.
0 — Slow
1 — Medium
2 — Fast
repeatdelay — Specifies the keyboard delay before repeat (in seconds).
0 — 1/5
1 — 1/4
2 — 1/3
3 — 1/2
4 — 3/4
5 — 1
6 — 2
7 — No Repeat
NOTE: These settings in a wnos.ini file will be saved into NVRAM if
EnableLocal=yes is set in the wnos.ini file.
Device=vusb
[ForceRedirect=DeviceID]
Device — Specifies the ID of a local USB device that is not redirected by
default.
ForceRedirect — Specifies the ForceRedirect. The DeviceID can be found
in the event log. For example, if you find “TCX USB: Local
Device(0x04f2,0x0112,0x03,0x01,0x01)”, set the parameter as:
Device=vusb ForceRedirect=0x04f2,0x0112,0x03,0x01,0x01
Table 3 Parameters for wnos.ini files and {username}.ini files , Continued
Parameter
*
Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description