Specifications

20 Chapter 3
TimeZone=zone
[ManualOverride={no, yes}]
[daylight={no, yes}]
[start=mmwwdd end=mmwwdd]
[TimeZoneName=timezonename]
[DayLightName=daylightname]
TimeZone — Specifies the time zone if the zone is unspecified on the thin
client or is used with ManualOverride. Supported zones are listed in the
System Preference dialog box (for example: ‘GMT – 12:00’ to ‘GMT + 13:00’
at one hour increment, ‘GMT + 03:30’, ‘GMT + 04:30’, ‘GMT + 05:30’, ‘GMT
+ 05:45’, ‘GMT + 06:30’, ‘GMT + 09:30’, ‘GMT – 3:30’ and ‘Greenwich Mean
Time’).
ManualOverride — Yes/no option to override the thin client System
Preference Menu setting with this TimeZone setting. TimeZone settings in
the wnos.ini file will be saved into NVRAM if EnableLocal=yes is set in the
wnos.ini file.
Daylight — Yes/no option to enable daylight saving time; mmwwd is a 6 digit
number to specify the start and the end of daylight saving time sing the
following:
Mm – 01 to 12 for the month of the year from January to December. For
example, 01 is January.
Ww – 01 to 04 for the week of the month, 05 is the last week. For example,
01 is 1st week.
Dd – 01 to 07 for the day in the week from Monday to Sunday. For example,
01 is Monday.
TimeZoneName — Display name sent to the ICA/RDP session (such as
Eastern Standard Time).
DayLightName — Display name for daylight saving time. If daylight saving
time is enabled, DayLightName should be named something similar to
Eastern Daylight Time, otherwise it should be the same as TimeZoneName.
NOTE: To configure daylight saving time for an RDP session, you must
enable the Allow Time Zone Redirection function. Use the following
guidelines:
Run gpedit.msc to open the Group Policy dialog box. Click Computer
Configuration in the Local Computer Policy tree. Expand the
Administrative Templates folder. Expand the Windows Components
folder. Expand the Terminal Services folder. Click Client/Server data
redirection to open the Setting list. Right-click Allow Time Zone
Redirection and select Properties to open the Allow Time Zone
Redirection Properties dialog box. Select the Enabled option, and then
click OK. Close the Group Policy dialog box.
VncPassword=password [encrypt={no,
yes}]
VncPassword=password — Specifies a string of up to 16 bytes as the
password used for shadowing.
encrypt — Yes/no option to encrypt the password; an encrypted string is
used as a password (ensures US HIPPA and Congress Acts compliance).
Table 2 Parameters for wnos.ini files only , Continued
Parameter Description