Specifications

WNOS INI Only Parameters 19
TCXLicense=<key> Activates the TCX Multimedia software where <key> is the license key.
The TCX license key is encrypted into a 5x5 key
(xxxxx-xxxxx-xxxxx-xxxxx-.xxxx), where x is the character 0-9, a-z, or A-Z
(lower- and uppercase letters are treated the same). More than one license
key can be accepted at the same time. With one identifier (TCX license),
delimit different keys by using a comma. The maximum number of keys is
ten.
When a local USB device is plugged in, some log messages such as “TCX
USB: Start watch device...” will appear in the event log window. These
messages notify the user that a USB device is attached and that the device
can be redirected to the server side. Before the local USB device is
redirected, however, WTOS checks a TCXLicense for VUSB; if the license
is invalid, the redirect will fail.
License validation occurs before every TCX redirectiion (USB, Multimedia) -
not just once. If no valid license is available initially, a USB device has
already been attached, and the log shows an invalid USB license, the thin
client does not have to be restarted after the valid license is entered
because the next TCX redirection with work. For Virtual USB, restarting the
ICA/RDP connection suffices.
TerminalName=name
[reboot={no, yes}]
TerminalName — Name of the thin client comprising a 15-character string.
reboot — Yes/no option to reboot the thin client if the terminal name is
changed.
ThinPrintEnable={no, yes}
[Port=port number]
ThinPrintEnable — Yes/no option to enable the thinprint client.
port — The TCP port of the thinprint client. The default port number value is
4000. The port number value must be less than 65535.
Table 2 Parameters for wnos.ini files only , Continued
Parameter Description