Specifications

56
recommended that extreme care be exercised when changing configuration
settings of the factory-installed applications.
To add a user to the Administrators group:
1. Log-in as an administrator.
2. Click Start | Settings | Control Panel | Administrative Tools, and then double-click
the User Manager icon to open the Local Users and Groups window.
3. In the Local Users and Groups window, select (highlight) the Users folder in the left
pane.
4. In the right pane of the Local Users and Groups window, double-click the name of the
user to open the [user name] Properties dialog box.
5. Click the Member Of tab.
6. Click Add to open the Select Groups dialog box.
7. Type Administrators in the Enter the object names to select field to enable the
Check Names command button.
8. Click Check Names, and then click OK.
The user will now be a member of both the Administrators and Users groups.
9. Flush the cache to retain this change.
Creating New Groups
New groups can be created by using the User Manager. You must be logged-on as an
administrator to create new groups. You can create groups locally or remotely through
VNC. However, due to local flash/disk space constraints, the number of additional groups
should be kept to a minimum.
Caution
Be sure to flush the Enhanced Write Filter cache during the current system
session in which a new group is created.
To create a new group:
1. Log-in as an administrator.
2. Click Start | Settings | Control Panel | Administrative Tools, and then double-click
the User Manager icon to open the Local Users and Groups window.
3. Click the Groups folder to view the contents in the right pane.
4. Click Action in the menu bar, and then click New Group to open the New Group dialog
box.
5. Type in the group name and description.
6. Click Create.
7. Click Close.