Specifications

Extended XPe Features

The operating system of the Winterm

9 series Thin Client has extended features not

found in standard Windows XP. Controls for extended XPe features are available only

through an Administrator logon account—with exceptions of the Citrix Program

Neighborhood, the Microsoft

Terminal Server Client (Remote Desktop Connection

Manager), and if installed, a special-order terminal emulation application.

Logging On

Users can log-on automatically or manually.

Automatic Log-on

The default for the thin client is automatic log-on. The administrator can use the Winlog

applet in the Control Panel to enable/disable auto logon and change the auto logon user

name, password, and domain. Only the administrator logon account can change auto

logon properties.

Note

To save the changes, be sure to flush the Enhanced Write Filter cache at any

time during the current system session. For information about the Enhanced

Write Filter and procedures for flushing the cache, refer to “Enhanced Write

Filter” on page 43.

The Log-on to Windows dialog box is bypassed if automatic log-on is enabled. If you want

to log-on as a different user while auto logon is enabled, log off while holding down the

Shift key. This will cause the Log-on to Windows dialog box to display and allow you to

manually enter the log-on information.

Manual Log-on

When automatic log-on is not enabled, upon thin client startup the Log-on to Windows

dialog box displays.

Type the log-on information in the User Name and Password text boxes:

· For a user log-on account, the factory-default user name and password are both

User.

· For an administrator log-on account, the factory-default user name and password

are both Administrator.

Note

Passwords are case sensitive but user names are not case sensitive.

Caution

For security purposes it is recommended that all passwords be changed from

the defaults. An administrator can change passwords by using the

Ctrl+Alt+Del key combination to open the Windows Security dialog box and

then clicking Change Password. The password can not be changed when

logged-on as a user.