Operating instructions

10
■ IR REMOTE
① STANDBY: press to enter and exit standby mode.
② INFO: view input and output messages from the SW-1102
③ INPUT SOURCE: press for direct selection of specific input source.
④ UP/DOWN: Scroll numerically through inputs.
⑤ UP/DOWN/LEFT/RIGHT: UP/DOWN to move highlighter bar to desired
parameter in On-Screen Menu (OSM) menu. Press LEFT/RIGHT to
increase/decrease setting value of selected parameters.
⑥ MENU: Activates OSM (on-screen menu)
⑦ PC BYPASS: Enters bypass mode (for VGA and DVI inputs)
⑧ 720p: Select to directly output 720p resolution.
⑨ 1080p: Select to directly output 1080p resolution.