User Guide
Front Panel Rear Panel
Power In
2.1mm DC Jack Input
Connect to the included 5V DC 1A power
supply.
Power LED
Solid: The unit is powered On
Off: The unit is powered Off
HDMI In
19-pin type A HDMI female
Supports HDMI and DVI/D with adapter
EDID Switch
Switch between Passthrough, 2ch and 5ch
Audio Modes
HDMI Output
19-pin type A HDMI female
Supports HDMI and DVI/D with adapter
Optical Output
Toslink optical port
Connect to digital audio input of pre-amplier,
AVR or audio system
Analog Audio
Output
2 x RCA (L/R Phono) Ports
Connect to analogue audio input of pre-
amplier, AVR or audio system
Copyright © 2020 WyreStorm Technologies | wyrestorm.com
EXP-CON-AUD-H2 Quickstart Guide | 200317
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
support@wyrestorm.com
2 of 4
A
B
C D A
B
C
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to the device
• Verify that all HDMI connections are not loose and are functioning properly
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable to
other devices to verify functionality.
Audio Connections
Analog Audio Out
Tip: Audio Postive (+)
Shield: Audio Negative (-)