Product specifications

These cost eective splitters are ideal for small commercial and multi-dwelling installations. The SP-UTP-0104 and SP-UTP-0108 oer single
HD source distribution, providing uncompressed true HD distribution over long distances using Cat5e/6/7 cabling, with the ability to control the
source from display locations.
HD OVER
UTP Splitters
Wyrestorm
Receiver
1 Input / 4 Outputs
Features
• Single HDMI input
• Four integrated dual Cat5e/6/7 outputs for
connection to your specied display adaptor
• IR emitter input for source control from
display location
• EDID management
• Can be run in single UTP mode (audio and
video only IR not supported in this mode)
Dimensions (WxHxD):
175mm x 40mm x 115mm / 6.9” x 1.6” x 4.5”
Weight: 0.4kgs / 0.9Ibs
Power Consumption: 8 Watts
Part Number: SP-UTP0104
1 Input / 8 Outputs
Features
• Single HDMI input
• Seven integrated dual Cat5e/6/7outputs for
connection to your specied display adaptor
• One standard HDMI Output for local display
• IR emitter input for source control from
display location
• EDID management
• Can be run in single UTP mode (audio and
video only IR not supported in this mode)
Dimensions (WxHxD):
268mm x 43mm x 153mm / 10.5” x 1.7” x 6”
Weight: 1.0kgs / 2.2Ibs
Power Consumption: 15 Watts
Part Number: SP-UTP0108
Dual Cat5e/6/7 Display Receiver
Features:
• Cat5e/6/7 to HD, Wide Band IR receiver
• Power supply and IR receiver supplied
• For use with all Pro Matrix and Cat5e/6/7
splitters
• Typical cable runs up to 50m
Dimensions (WxHxD):
60mm x 23mm x 115mm / 2.3” x 0.9” x 4.5”
Part Number: RX-50IR-PRO
or
RX-50-PRO (single UTP mode)
Full product Spec Sheets
available at www.wyrestorm.com
USB to 5V Cable Available
Developed to enable powering of receivers via TV USB output. Ideal for at
panel TV installations where space is at a premium. Cable lenght 600mm.
Part Number: CAB-USB-5V
Cannot be used with HDBaseT models
14