Installation Guide
Installation Guide
WC-2929-60-DBL
Mark the screw position
Diameter 6mm
Depth 40 mm
Draw horizontal line
Install the mirror: use a pencil to mark the placement of the
screw holes on the wall, drill the holes and insert the plastic
wall anchors.
4
Install the counter. Seal around the top of the cabinet with
clear silicone sealant. Do not over apply. Allow to dry 24
hours for proper curing.
3
Unpack the handles and install them on the vanity. Do not
over tighten when attaching.
2
INSTALLATION INSTRUCTIONS
1
The handles are safely stored for transport in a box inside
of the cabinet. Look inside the vanity for the box with your
handles.




