ROBOTIC POOL CLEANER User Manual WY100Pro
TM Thank you for purchasing Wybot Robotic Pool Cleaner. Please read through the entire manual before using your new robotic pool cleaner. We are not held liable for any loss or injury caused by improper use. If you encounter a problem TM with your Wybot product, please contact our customer service for assistance. WYBOT Customer Service: Email: support@wybotpool.com Web: www. wybotpool.
CONTENTS Important Precautions.............................................................. 01 1. Introduction.......................................................................... 03 2. Packing List............................................................................ 03 3. Product Diagram................................................................... 04 4. Specifications........................................................................ 05 5. Operations.................................
Important Precautions Read and Follow All Instructions 1. Please read the manual carefully, and use the cleaner according to the manual. We are not held liable for any loss or injury caused by improper use. 2. Use the accessories recommended or sold by the manufacturer only. 3. Dry the charging port after removing the cleaner out of water and make sure the cleaner is switched off (the indicator is off) if you want to charge the cleaner. 4.
15. Do not operate the cleaner while pool filter is running. 16. The cleaner should be stored in a cool and ventilated place, away from direct sunshine or any heat source, never cover it with anything that would cause internal electrical components overheating.
1. Introduction The robotic pool cleaner WY100Pro is a new type of rechargeable automatic cleaning equipment for swimming pools, cordless and easy to use. 2.
3.
4. Specifications 1. Model WY100Pro 2. Rated Working Voltage 10.8V 3. Power 65W 4. Run Time Max. 90min for one cycle 5. Charger Input 100-240V, 50-60Hz 6. Charger Output 5A 7. Battery Capacity 9200mAh 8. Charging Time 3-4 Hours 9. Pool Size Up to 861sq.ft (80m ) 10. Flow rate approx.10m /h(2642gal/h) 11. Filter Density 180 μm 12. Moving Speed approx. 36ft/min(11m/min) 13. Waterproof Grade IPX8 14. Charging Environment Temperature 41 ℉ -95 ℉ (5℃ -35℃ ) 15. Max Water Depth 8.
5. Operations 5.
Item Function ① Power on/ off Press the button, blue light indicates the cleaner is powered on. Press the button again, red light indicates the cleaner is powered off. Indicator 1.Blue light is steady on: power on 2.Blue light flashes: the cleaner is working 3.Yellow light flashes: low battery and start to self-parking 4.Yellow light is steady on: self-parking finished ② Description Note: When the yellow light is steady on, power off the cleaner and charge it.
b.
5.3 Filter Cleaning a. Open the top cover: Put the robot aside the pool and open the top cover, the filter basket is located as shown in picture b. Take out the filter basket c. Wash filter basket d. Re-install the filter basket in reverse steps.
5.4 Charge the battery a. Remove the cleaner from the pool b. Make sure the cleaner is powered off (no indicator flashes) and charging port is dry, attach the charger to the charging socket. Red light indicates it is charging, green light indicates it is fully charged. LED Indicator Red - Charging in Progress Green - Fully Charged Note: Charge the cleaner indoor and at least 3m (appr. 10ft) from the edge of the pool for charging.
5.5 Charger indicator Colour & Status of indicator Charging status Green light is steady on Waiting for a recharge or connector not plugged or charging finished Red light is steady on The battery is charging Red light flashes Low battery or battery is damaged 5.6 Installation of Floating Block Attention: If your robot is performing well, please ignore these instructions.
b. Tear off the protective film on the back of the floater and stick one by one according to the position shown in the figure c.
5.7 Smart Device connection Easy operation on your smart devices: 1. Please download our WinnyGo App through Apple Store or Google Play on your smart device; 2. Open the App, search your robot for connecting, then you can operate the robot on your smart device. 5.8 Pool water condition Remark: The pool water condition must be within following parameters: -PH: 7.0-7.4 -Temperature: 50 ℉ -95 ℉ (10℃ -35℃ ) -Salt: Max. 5,000 ppm -Chlorine: Max.
6. Warranty TM 1. This product is covered by Wybot warranty for 24 months (only for driving kit and control box kit) from the date of purchase. Consumable parts are beyond warranty which include Filter Tray/ Brush/ Wheels/Nozzles. 2. This warranty is voided if the product has been altered, misused, or has been repaired by unauthorized personnels. 3. The warranty extends only to manufacturing defects and does not cover any damage resulting from mishandling of the product by the owner. 4.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
USER MANUAL
