Manualshelf

Owners manual

ManualsBrandswww.BuyElevators.com Dialink ManualsLandline Phone AccessoriesDialink ADA Elevator Phone - Box
11121314151617181920
Page 12
The default factory programming will be done if the serial E2prom is
installed and the dip switch N.5 is OFF. When the Dialink is turn on it will
do the default programming, and when done it will indicate this with 2 beeps
and then put the Dialink on-hook.
Note: The Dialink will dial to a emergency/info telephone only if the digital
voice announcer message has been recorded (*7) or erased (*8). Or if
the digital voice announer configuration N.35=00 (disabled)