Owners manual

Page 8
Note: When a X is shown, use any appropiate number. If a number is shown
that specific number must be used.
a. Express Format 4+1
This DTMF format consists of a 4 digit account number, 2 digits for
message type, and a single digit event code.
Example: XXXX 17 X #30
XXXX -> Account number
17 -> Message Type
X -> Event Code
#30 -> configuration
b. Express Fornat 4+2
This DTMF format consists of a 4 digit account number, 2 digits for
message type, and a 2 digit event code.
Example: XXXX 27 XX #30
XXXX -> Account number
17 -> Message Type
XX -> Event Code
#30 -> configuration
c. Ademco High Speed Format.
This DTMF format consists of a 4 digit account number, 8 zone codes, and 1
alarm type digit. With this format you can identify up to 8 different
telephones by using a zone per phone. A 5 in a zone position means no
alarm. Example: shows an alarm from the 3rd telephone.
Example: XXXX 55 1 55555 7 #30
XXXX -> Account number
55 -> Idel Zone
1 -> New Event
55555
7 -> Normal Alarm
#30 -> configuration
d. Ademco Contact ID format.
This DTMF format consists of a 4 digit account number, 2 digits for
message type, and a 9 digit data field.
Ejemplo: XXXX 18 1 14000 XXX #30
XXXX -> Account number
18 -> Message Type
1 -> New Event
14000-> General Alarm