Specifications

无锡威达智能电子股份有限公司 JL-8.3-13
8
order to achieve the key assembly,
the finger buckle can not be out of
the plastic shell button hole, key
surface positioning through the
hole using silicone rubber bag
plastic design, so that the entire
silicone button surface has no
holes to ensure that the use of a
long plate surface neat, silicone
key need to be hard
14 导电胶材质
Conductive
adhesive Material
必须使用硅胶原料（不加粉），并
且没有刺激性气味
Must use silicone material (no
powder) and no pungent odor
15 Metal dome（锅
仔片）
Metal Dome(pot
slices)
遥控器所有按键采用 metal dome
按键，并且寿命必须≥50 万次，连
续按压测试次数≥30 万次，可恢复
到原荷重
Remote control all keys to use
themetal Dome button, and the life
must be ≥ 5million times,
continuous press test number ≥3
million times, can restore to the
original load
2、 产品规格
Product Specifications
序号
NO.
项目
Project
规格参数
Specification parameter
备注]
Note
1 工作温度
Operating temperature
-20～60℃
2 相对湿度
Relative humidity
≤95%
3 大气压力
Atmospheric pressure
86～106Kpa
Wuxi Weida Intelligent Electronics Co., Ltd.