Specifications

无锡威达智能电子股份有限公司 JL-8.3-13
16
四、遥控器按键操作说明
Remote Control key action Description
1、 当遥控器未连接上机顶盒时，发送红外键值；连上机顶盒蓝牙，遥控器
发蓝牙键值；
When the remote control is not connected to the set-top box, the
infrared key value is sent; when the set-top box Bluetooth is connected,
the remote control sends the Bluetooth key value;
2、 指示灯状态：遥控器上电后，按键按一下指示灯闪烁一次，直到按键抬
起或 30s 后停止闪烁。
Infrared State: After the remote control is powered on, press the button
once and the indicator flashes once, until the button is raised or stops
flashing after 30s.
3、 配对功能：当同时按住 “OK”和 “Vol-”键并持续三秒，同时指示灯
闪烁；
Pairing function: When the "OK" and " Vol- " keys are kept down for
three seconds, while the LED are blinking; During pairing,
遥控器距离>10m；
Remote control distance >10m;
4、 支持蓝牙遥控器在线升级，盒子上电时自动检测遥控器版本，版本低于
服务器推送版本时自动升级；
Bluetooth remote control to support the online upgrade, box on the power
automatically detect the version of the remote, version less than the
server push version automatically upgrade;
5、 蓝牙设备名：NEBULA Remote。
Bluetooth device Name: NEBULA Remote.
6、 ATV9.0：同时按住“OK”+“Back 调出 Bug report；
ATV9.0: Press and hold "OK" + "Back at the same time to call up the Bug
report.
7、 遥控器其他要求：
other remote control requirements:
1、配对功能要求：不得存在扫描不到蓝牙设备或配对不上（包括短时间
Wuxi Weida Intelligent Electronics Co., Ltd.