Specifications

4.3.2
低温贮存试验
Low temperature
storage test
温度：-25°C
湿度：NA
存储时间：48 hours
样品数：5PCs
常温放置一小时，没有出现功能和外观问题
Temperature: -25 ° C
Humidity: NA
Storage time: 48 Hours
Sample number: 5PCS
Place an hour, no function and
appearance problem
用以下测试条件测试之后, 检查电子
及机械功能都能符合本规格书要求
After testing the following
test conditions, check the
electronic and mechanical
functionality can comply
with the requirements of
this specification.
4.3.3
恒定湿热存储
Constant wet heat
storage
温度：55°C
湿度：93±3%
存储时间：96 hours
样品数：5PCs
常温放置一小时，没有出现功能和外观问题
Temperature: 55 ° C
Humidity: 93 ± 3%
Storage time: 96 Hours
Sample number: 5PCS
Place an hour, no function and
appearance problem
用以下测试条件测试之后, 检查电子
及机械功能都能符合本规格书要求
After testing the following
test conditions, check the
electronic and mechanical
functionality can comply
with the requirements of
this specification.
4.3.4
温度冲击存储测试
Temperature
impact storage
test
高温 60°C （2 小时）,
低温-30°C（2 小时），
切换时间（3 分钟），5 个循环
1.常温放置一小时后测试，不许有功能缺
失。
2.涂层外观无异常，无脱落，无裂纹，无变
色等异常。
High temperature is 60 ° C (2
hours),
Low temperature -30 ° C (2
hours),
Switch time (3 minutes), 5 cycles
1. Test for an hour after normal
temperature, and do not have
functional missing.
2. The appearance of the coating
is abnormal, no abnormality such
as cracking, no cracks, no
discoloration.
用以下测试条件测试之后, 检查电子
及机械功能都能符合本规格书要求
After testing the following
test conditions, check the
electronic and mechanical
functionality can comply
with the requirements of
this specification.