Specifications

4.2.18
包装跌落测试:
Packaging drop
test:
将完好包装的整箱遥控器放置于跌落测
试台上，从 60cm 的高度跌落至台面
上。
需测试三面，一边，一角。
测试顺序：X,Y,Z,边，角
Place the finished full
box of remote controls on
the drop test bench,
falling from the height of
60 cm to the countertop.
It is necessary to test
three sides, one side, one
corner.
Test sequence: x, y, z, edge,
angle
测试后的遥控器不可有功能失
效
Remote control after
testing does not have
functional failure
4.3 环境测试要求 Environmental test requirements
编号
Numbering
类目
Class
测试条件
Test Conditions
规格要求
Specification requirements
4.3.1
高温贮存试验
High temperature
storage test
温度：60°C
湿度：NA
存储时间：48 hours
样品数：5PCs
常温放置一小时，没有出现功能和外观问题
Temperature: 60 ° C
Humidity: NA
Storage time: 48 Hours
Sample number: 5PCS
Place an hour, no function and appearance
problem
用以下测试条件测试之后, 检查电子
及机械功能都能符合本规格书要求
After testing the following
test conditions, check the
electronic and mechanical
functionality can comply
with the requirements of
this specification.