Specifications

Wuxi Weida Intelligent Electronics Co.,Ltd. 无锡威达智能电子股份有限公司
16
In IR mode: press and hold “OK + back” and send 0x62 at the same time;
In BT mode: press and hold “OK + back” and send 0xec (0x0c) at the
same time
10、 休眠及唤醒
Sleep and wake up
未进行任何数据交互时，遥控器保持连接 1 小时后主动进入休眠断连
状态， 按任意键可唤醒遥控器；
如还在连接状态，则发送对应按键的蓝牙码值；如已进入蓝牙连接断
开状态，则进入回连状态。
When there is no data interaction, the remote control remains connected
for 1 hour and then actively enters the sleep disconnection state. Press
any key to wake up the remote control,
If it is still connected, send the Bluetooth code value of the
corresponding key; If the Bluetooth connection is disconnected, it will
enter the back connection state.
11、 遥控器其他要求：
other remote control requirements:
1、配对功能要求：不得存在扫描不到蓝牙设备或配对不上（包括短时间
内连续按配对键）的问题，请验证 50 次确保无问题；
The pairing feature requires that no Bluetooth devices be scanned or
not paired up (including a continuous press pairing key for a short
period of time), verify that ensure no problem;
2、BT 长连接：遥控器不主动断开蓝牙连接，断开连接后若回连超时则进
入深度休眠模式，待下次按键唤醒回连；不得存在回连不上的问题，
包括盒子断电回连，遥控器断电回连，静置 2 小时回连等，请验证 50
次确保无问题；
BT Long connection: The remote does not actively disconnect the
Bluetooth connection, disconnect if the return timeout to enter the
deep sleep mode, the Next button to wake up the connection, no return
to the problem, including the box power back, remote control power back,
static 2 hour back, please verify that times to ensure no problems;
3、抗干扰功能要求：不得存在非常影响主机 WIFI 吞吐量的问题，请确保
连接遥控器时主机端 WIFI 吞吐量正常；