User's Manual

Power/Mode/Stepless Button
When certain mode is used for over 5 seconds, the product will store the
mode as the memory mode. It will start in the same mode at the next boot.
Brushing time limit
Either mode has reminders for four parts of the mouth, each part has 30
seconds. There is an interval of 0.1 second after each reminder. Each time of
brushing lasts for 2 minutes, with 3 reminders. After 2 minutes, the
toothbrush will turn it off automatically.
IV. How to Use
Power On
Press down the power button to switch
on the product. For first use, the product
will work in the cleaning mode by default.
Power Off
After the product is switched on, run a
complete one-way cycle of the five
modes from cleaning mode, soft mode,
sensitive mode, whitening mode to SPA
mode, and then turn off the toothbrush.
After the product is switched on, use any
mode for more than 5 seconds, the
toothbrush can be turned off by pressing
the power button.
After booting, use any mode for more
than 2 minutes, the toothbrush will be
turned off automatically.
Switch Between Modes
After the product is switched on, it will
work in cleaning mode by default.
Within 5 seconds, press the power
button again to switch to the next mode.
The sequence shall follow the one-way
cycle among 6 modes, namely "soft
mode-sensitive mode-whitening mode-
SPA mode-power off".
Power/Mode/
Stepless Button
Cleaning Mode
Soft Mode
Sensitive Mode
Whitening Mode
SPA Mode
5