Datasheet
Kunde / customer :
Artikelnummer / part number :
Bezeichnung :
LAN-Übertrager WE-LAN
description : LAN-Transformer WE-LAN
DATUM / DATE : 2017-05-22
I Rollenspezifikation / tape and reel specification :
A mm
B mm
C mm
D mm
F mm
G mm
H mm
I mm
J mm
Rollenspezifikation / Reel specification:
a 330,0 ± 2,0 mm
b 21,00 ± 0,8 mm
c 13,60 ± 0,5 mm
d 100,0 ± 1,0 mm
Freigabe erteilt / general release:
..................................................................................
..................................................................................
Datum / date
JaB 2017-12-11
JaB 2017-05-22
............................................... ..................................................
JaB 2015-11-19
Geprüft / checked Name Datum / date
The force for tearing off cover tape is 40 to
120 grams in arrow direction
Packaging quantities:
1200 pieces/reel
7200 pieces/carton
1,50 ± 0,10
4,00 ± 0,10
2,00 ± 0,10
1,50 ± 0,10
1,75 ± 0,10
0,3 ± 0,10
E
mm
D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
Revision 03
Kunde / customer
24,00 ± 0,10
Würth Elektronik eiSos GmbH & Co.KG
http://www.we-online.com
Spezifikation für Freigabe / specification for release
749020100A
Revision 02
Revision 01
Würth Elektronik
11,50 ± 0,10
11,42 ± 0,10
16,00 ± 0,10
Kontrolliert / approved
Unterschrift / signature
Änderung / modification
Gurtspezifikation / Tape specification:
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required
or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
SEITE 3 VON 3