Data Sheet

Kunde / customer :
Artikelnummer / part number :
Bezeichnung :
LAN-Übertrager WE-LAN
description : LAN-Transformer WE-LAN
DATUM / DATE : 2015-01-26
I Rollenspezifikation / tape and reel specification :
A 16,50 ± 0,10 mm
B 32,00 ± 0,30 mm
B1 28,40 ± 0,10 mm
B2
14,20
± 0,10
mm
C 1,50
+ 0,10/-0
mm
D 4,00 ± 0,10 mm
E 2,00 ± 0,10 mm
F 1,50 + 0,10/-0 mm
G 20,00 ± 0,10 mm
H 1,50
+ 0,10/-0
mm
I 6,60 ± 0,10 mm
J 2,00
+ 0,10/-0
mm
K 1,70
+ 0,10/-0
mm
L 1,50
+ 0,10/-0
mm
Rollenspezifikation / Reel specification:
a 330,0 ± 2,0 mm
b 21,00 ± 0,8 mm
c 13,60 ± 0,5 mm
d 100,0 ± 1,0 mm
Freigabe erteilt / general release:
JaB 2015-01-26
..................................................................................
..................................................................................
LuRa 2014-07-28
Datum / date MLe 2014-01-10
MLe 2012-11-28
Mle 2012-10-31
............................................... ..................................................
MLe 2012-10-10
Geprüft / checked Name Datum / date
Kontrolliert / approved
Unterschrift / signature
Änderung / modification
Gurtspezifikation / Tape specification:
Kunde / customer
Würth Elektronik
http://www.we-online.com
Spezifikation für Freigabe / specification for release
749020010A
Revision 01
Revision 00
Revision 05
Würth Elektronik eiSos GmbH & Co.KG
D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
Revision 04
Revision 03
Revision 02
mm
± 0,10
B3
17,93
This electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required
or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
SEITE 3 VON 3