User Manual

Kunde / customer :
Artikelnummer / part number :
Bezeichnung :
LAN-Übertrager WE-LAN
description : LAN-Transformer WE-LAN
DATUM / DATE : 2005-07-15
I Rollenspezifikation / tape and reel specification :
A 9,9 ± 0,1 mm
B 12,0 ± 0,2 mm
+ 0
,
1
- 0
,
0
D 4,00 ± 0,1 mm
E 2,00 ± 0,1 mm
F 1,75 ± 0,1 mm
G 11,5 ± 0,1 mm
H 13,0 ± 0,1 mm
I 6,1 ± 0,1 mm
W 24,0 ± 0,1 mm
Rollenspezifikation / Reel specification:
a 330,0 ± 2,0 mm
b 21,00 ± 0,8 mm
c 13,50 ± 0,5 mm
d 100,0 ± 1,0 mm
Freigabe erteilt / general release:
.................................................................................. ..................................................................................
Datum / date
TBr 2005-07-15
TBr 2004-11-19
............................................... ..................................................
TBr 2004-06-04
Geprüft / checked Name Datum / date
D-74638 Waldenburg · Max-Eyth-Straße 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
http://www.we-online.com
Spezifikation für Freigabe / specification for release
749013010
Kunde / customer
Würth Elektronik
Würth Elektronik eiSos GmbH & Co.KG
Version 3
Version 2
Version 1
Kontrolliert / approved
Unterschrift / signature
Änderung / modification
Gurtspezifikation / Tape specification:
mm1,50C
Ø c
a
d
b
The force for tearing off cover tape is
10 to 130 grams in arrow direction
165 to 180°
feeding direction
I
H
A
W
FEDøC
B
G
This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear
control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required
or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or
performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.

SEITE 3 VON 3