Datasheet

Packaging Specification - Tape and Reel: [mm]
B0
A0
D1 P1
P0
P2
ES
F
W
d
T1
T2
T
K0
No Component
min. 160mm
Components No Component
min. 100mm
Cover Tape
min. 400mm
Feeding direction
D0
End
Start
Carrier Tape
Cover Tape
Top Cover
Tape
A
A
D0
2
packaging is reffered to the international standard IEC 60286-3:2013
A0 B0 W T T1 T2 K0 P0 P1 P2 D0 D0 / 2 D1 d E S F Tape Type 3 VPE / packaging unit
tolerance typ. typ. ±0,3 ref. max. typ. typ. ±0,1 ±0,1 ±0,15 +0,1/ -0,0 +0,05/ -0,0 min. ±0,05 ±0,1 ±0,1 ±0,1 pcs.
value 18,30 27,30 44,00 0,50 0,10 12,00 11,70 4,00 24,00 2,00 1,50 0,75 2,00 0,20 1,75 40,40 20,20 Polystyrene 200
Pull-of force
Tape width
44 mm
0,1 N - 1,3 N
1 6 5 °
- 1 8 0 °
B
D
C
W1
close to center
W3
W2
N
A
A B C D N W1 W2 W3 W3
Tolerance ± 2,0 min. min. min. min. + 2,0 max. min. max.
Tape width 44 mm 330,00 1,50 12,80 20,20 80,00 44,40 50,40 43,90 47,40
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
KaS WPi DIN ISO 2768-1m
DESCRIPTION
WE-LF SMD Common Mode Power
Line Choke
ORDER CODE
74466340007
SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
SH
004.000 Valid 2017-12-01 eiSos 3/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.