Datasheet

Number of Pins (xPxC) 8P8C
Article Properties:
Durability 750 Mating cycles
Kind Properties:
Insulator Material LCP
Insulator Flammability Rating UL94 V-0
Insulator Color Black
Contact Material Copper Alloy
Contact Plating Gold
Contact Type Stamped
Shielding Material Brass
Shielding Plating Nickel
Material Properties:
Operating Temperature -40 up to +85 °C
Compliance Lead free / RoHS
General Information:
Properties Test conditions Value Unit Tol.
Rated Current I
R
1.5 A
Working Voltage 125 V (AC)
Withstanding Voltage Pin to Pin 1 min 1000 V (AC)
Withstanding Voltage Shielding
to Pin
1 min 1500 V (AC)
Contact Resistance R 20 mΩ max.
Insulation Resistance R
ISO
1000 MΩ min.
Electrical Properties:
UL Approval E324776
Certification:
Packaging Tape and Reel
Packaging Properties:
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. [phone] - 0
www.we-online.com
[e-mail]
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
DaSc CLe DIN ISO 2768-1m
DESCRIPTION
WR-MJ Modular Jack Tab Down
Middle mounted Shielded 8P8C THR
compatible
ORDER CODE
615108150221R
REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE
001.000 Valid 2018-08-07 eiCan 2/6
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.