Datasheet

User’s Manual
Page 12 of 15
This document is only valid on the
date of printing: 2016-10-26
WERI Mini Applicator
I:\Specs\eiCan\WERI\ConTOOLC\Datasheet\User's Manual_WERI Mini Applicator.docx
8 Stroke setting (qualified technician only)
The mini applicator is mounted by default with a 40 mm stroke, but it can be lowered to 30 mm by
changing the cam position.
The cam for feeding the terminal in "pre-feed” or “manual” configuration is attached
to the rear edge of the mini applicator. By default, the mounted cam is the “post-feed” or “automatic”
one.
Moving the post-feed cam from B to A changes the stroke from 40 to 30 mm.
Moving the pre-feed cam from C to B changes the stroke from 40 to 30 mm.