User's Manual

8.2.15 FactorySettings: Read out the factory settings
Settings
index
Designation
Permissible
values
Default value Permissions
Number
of
Bytes
32
FactorySettings
-
- read
8
This parameter defines the factory settings of the module.
Byte no. Description
3 : 0 Serial number: 3 byte ID (LSB first), 1 byte PID
6 : 4 Hardware version: Major , Minor, Patch
7 Frequency correction factor
8.2.15.1 Example 1
Request the factory settings of the module using CMD_GET_REQ :
Start signal Command Length Settings index CS
0x02 0x0A 0x01 0x20 0x29
Response CMD_GET_CNF : Successfully read out the FactorySettings .
Start signal Command | 0x40 Length Status
Parameter
CS
0x02 0x4A 0x09 0x00
0x01 0x00 0x00 0x74
0x00 0x03 0x02 0x00
0x35
Successfully returned the following factory settings, the order of the multi byte parameters
was changed to MSB first to be converted into decimal numbers later:
• Serial number: 0x74.000001 (116.000001) with PID 0x74 (116) and SN 0x000001 (1)
• Hardware version 0x02 0x03 0x00 (2.3.0)
• Frequency correction factor of 0x00 (0)
For being compatible to this manual a Hardware Version of 2.2.0 or newer is
required. Full functionality as described in this manual requires a module in
Hardware Version 2.3.0 or newer.
Themisto-I reference manual version 1.0 © August 2019
www.we-online.com/wireless-connectivity 60