User's Manual

Start signal Command | 0x40 Length Status CS

0x02 0x49 0x01 0x00 0x4A

8.2.13.2 Example 2

Request the repeater ﬂags using

CMD_GET_REQ

Start signal Command Length Settings index CS

0x02 0x0A 0x01 0x10 0x19

Response

CMD_GET_CNF

: Successfully read out the value of

RpFlags

. The 2 byte parameter is

to be used LSB ﬁrst. A parameter value 0x0000 indicates that the repeater mode is disabled.

A value of 0x0001 indicates that the repeater mode is enabled.

Start signal Command | 0x40 Length Status Parameter CS

0x02 0x4A 0x03 0x00 0x00 0x00 0x4B