User's Manual

8.2.9 MAC_SourceNetID: Configure the source network id
Settings
index
Designation
Permissible
values
Default value Permissions
Number
of
Bytes
10
MAC_SourceNetID
0 - 254
0 read/write
1
This UserSetting specifies the source network id to be used in address modes 2 and 3.
Setting the Source Net ID to Broadcast (255) is not allowed.
8.2.9.1 Example 1
Set the source network id to 1 using the CMD_SET_REQ :
Start signal Command Length Settings index Parameter CS
0x02 0x09 0x02 0x0A 0x01 0x02
Response CMD_SET_CNF : Successfully modified the setting.
Start signal Command | 0x40 Length Status CS
0x02 0x49 0x01 0x00 0x4A
8.2.9.2 Example 2
Request the source network id using CMD_GET_REQ :
Start signal Command Length Settings index CS
0x02 0x0A 0x01 0x0A 0x03
Response CMD_GET_CNF : Successfully read out the source network id as 2.
Start signal Command | 0x40 Length Status Parameter CS
0x02 0x4A 0x02 0x00 0x02 0x48
Themisto-I reference manual version 1.0 © August 2019
www.we-online.com/wireless-connectivity 50