User's Manual

8.2.7 MAC_DefaultDestNetID: Configure the destination network id
Settings
index
Designation
Permissible
values
Default value Permissions
Number
of
Bytes
7
MAC_DefaultDestNetID
0 - 255
255 read/write
1
This UserSetting specifies the default destination network ID, which is used in address
modes 2 and 3. If the special broadcast id and the broadcast address are set to 255,
the packets will be received by all network participants. Its volatile RuntimeSettings can be
modified with the command CMD_SET_DESTNETID_REQ at runtime.
8.2.7.1 Example 1
Set the default destination network id to 1 using the CMD_SET_REQ :
Start signal Command Length Settings index Parameter CS
0x02 0x09 0x02 0x07 0x01 0x0F
Response CMD_SET_CNF : Successfully modified the setting.
Start signal Command | 0x40 Length Status CS
0x02 0x49 0x01 0x00 0x4A
8.2.7.2 Example 2
Request the default destination network id using CMD_GET_REQ :
Start signal Command Length Settings index CS
0x02 0x0A 0x01 0x07 0x0E
Response CMD_GET_CNF : Successfully read out the default destination network id as 0.
Start signal Command | 0x40 Length Status Parameter CS
0x02 0x4A 0x02 0x00 0x00 0x4A
Themisto-I reference manual version 1.0 © August 2019
www.we-online.com/wireless-connectivity 47