User's Manual

Abbreviations and abstract
Abbreviation Name Description
ACK Acknowledgement
Acknowledgement pattern confirming the reception of
the transmitted data packet.
CS Checksum
XOR checksum to check the correct transmission of
the prepended Bytes.
DC Duty cycle
Transmission time in relation of one hour. 1% means,
channel is occupied for 36 seconds per hour.
FSE Field Sales Engineer
Support and sales contact person responsible for
limited sales area.
0xhh [HEX] Hexadecimal
All numbers beginning with 0x are stated as
hexadecimal numbers. All other numbers are decimal
unless notified .
HIGH High signal level Signal level equals VCC.
LOW Low signal level Signal levels equals 0 Volts.
LPM Low power mode Operation mode for reduced power consumption.
LRM Long range mode
Tx mode increasing the RX sensitivity by using
spreading and forward error correction.
LSB Least significant bit
MSB Most significant bit
PL Payload
The real, non-redundant information in a frame /
packet.
RF Radio frequency
Describes everything relating to the wireless
transmission.
UART
Universal
Asynchronous
Receiver Transmitter
The UART allows communicating with the module of
a specific interface.
US UserSettings
Any relation to a specific entry in the UserSettings is
marked in a special font and can be found in the
chapter 8 .
VCC Supply voltage
Themisto-I reference manual version 1.0 © August 2019
www.we-online.com/wireless-connectivity 2