User's Manual

The receiver and transmitter modules must always operate in the same ad-

dress mode! Otherwise, the receiver cannot interpret the received data packet

meaning that the packet is discarded!

8.2.5.1 Example 1

Set the address mode to 2 using the

CMD_SET_REQ

Start signal Command Length Settings index Parameter CS

0x02 0x09 0x02 0x04 0x02 0x0F

Response

CMD_SET_CNF

: Successfully modiﬁed the setting.

Start signal Command | 0x40 Length Status CS

0x02 0x49 0x01 0x00 0x4A

8.2.5.2 Example 2

Request the address mode using

CMD_GET_REQ

Start signal Command Length Settings index CS

0x02 0x0A 0x01 0x04 0x0D

Response

CMD_GET_CNF

: Successfully read out the address mode as 1.

Start signal Command | 0x40 Length Status Parameter CS

0x02 0x4A 0x02 0x00 0x01 0x4B