User's Manual

Start signal Command | 0x40 Length Status CS

0x02 0x49 0x01 1 Byte 1 Byte

Status:

0x00: Request successfully received and processed

0x01: Operation failed due to invalid parameter

7.5.2 CMD_GET_REQ

This command can be used to query the UserSettings parameters. The respective parame-

ters are accessed by means of the corresponding SettingsIndex.

Parameters with size of two or more Bytes will be transmitted LSB ﬁrst unless

noted otherwise.

Format:

Start signal Command Length SettingsIndex CS

0x02 0x0A 0x01 1 Byte 1 Byte

Response (

CMD_GET_CNF

Start signal Command | 0x40 Length Status Parameter CS

0x02 0x4A 1 Byte 1 Byte (Length - 1) Bytes 1 Byte

Status:

0x00: Request successfully received and processed

0x01: Request not successful

7.5.3 CMD_FACTORY_RESET_REQ

This command restores the default UserSettings of the module. If this was successful, a

software reset of the module is performed in addition.

Format:

Start signal Command Length CS

0x02 0x12 0x00 0x10

Response (

CMD_FACTORY_RESET_CNF