User's Manual

7.4.4 CMD_SET_DESTADDR_REQ

This command serves to conﬁgure the destination address in address modes 1, 2 and 3.

Unlike the UserSettings parameter

MAC_DefaultDestAddr

, this is a volatile runtime parame-

ter.

Format: Mode 1 + 2:

Start signal Command Length Dest. address CS

0x02 0x08 0x01 or 0x02 1 Byte or 2 Byte 1 Byte

Response (

CMD_SET_DESTADDR_CNF

Start signal Command | 0x40 Length Status CS

0x02 0x48 0x01 1 Byte 1 Byte

Status:

0x00: Request successfully received and processed

0x01: Request not successful