User's Manual

The parameter must be chosen with prudence to reach good functionality

(radio environment dependent) and compliance with valid regulatory require-

ments as the EN 300 220 in the European Union or the FCC in the United

States of America.

Format:

Start signal Command Length Channel CS

0x02 0x06 0x01 1 Byte 1 Byte

Response (

CMD_SET_CHANNEL_CNF

Start signal Command | 0x40 Length Conﬁgured channel CS

0x02 0x46 0x01 1 Byte 1 Byte

7.4.2.1 Example

Selection of channel 226:

Start signal Command Length channel CS

0x02 0x06 0x01 0xE2 0xE7

Response:

Start signal Command | 0x40 Length Conﬁgured channel CS

0x02 0x46 0x01 0xE2 0xA7

7.4.3 CMD_SET_DESTNETID_REQ

This command serves to conﬁgure the Dest. netID in address mode 2 and 3. Unlike the

UserSettings parameter

MAC_DefaultDestNetID

, this is a volatile runtime parameter.

Format:

Start signal Command Length Dest. netID CS

0x02 0x07 0x01 1 Byte 1 Byte

Return (

CMD_SET_DESTNETID_CNF

Start signal Command | 0x40 Length Status CS

0x02 0x47 0x01 1 Byte 1 Byte

Status:

0x00: Request successfully received and processed

0x01: Request not successful