User's Manual

7.2.4 CMD_REPEAT_IND
This command indicates that the module has repeated a data packet when acting in repeater
mode. The source address and network id is the address of the origin sender of the RF
packet, the destination address and network id is the address of the device that is supposed
to receive the RF packet.
Format in address mode 0:
Start
signal
Command Length Status
Address
mode
CS
0x02
0x80 0x02 1 Byte
0x00
1 Byte
Format in address mode 1:
Start
signal
Command Length Status
Address
mode
Dest.
ad-
dress
Source
ad-
dress
CS
0x02
0x80 0x04 1 Byte
0x01 1 Byte 1 Byte
1 Byte
Format in address mode 2:
Start
signal
Com. Length Status
Address.
mode
Dest.
NetID
Dest.
address
Source
NetID
Source
address
CS
0x02
0x80 0x06 1 Byte
0x02 1 Byte 1 Byte 1 Byte 1 Byte
1
Byte
Format in address mode 3:
Start
signal
Com. Length Status
Address.
mode
Dest.
NetID
Dest.
address
Source
NetID
Source
address
CS
0x02
0x80 0x08 1 Byte
0x02 1 Byte
2 Byte
(LSB first)
1 Byte
2 Byte
(LSB first)
1
Byte
Status:
0x00: OK
0x01: Failed
Themisto-I reference manual version 1.0 © August 2019
www.we-online.com/wireless-connectivity 27