User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 8 of 85
NormalOperationPage
BacklightBrightness
Dialog
OTARConfirmation
Dialog
OTARStatusView
VolumeAdjustment
Dialog
EncryptionKeySelection
Dialog
KeypadChannelEntry
Dialog
ScanStatusView
MenuDialog
SimulcastMode
RelayMode
Relay/SimulcastMode
ChannelEditDialog
QMEMDialog
KeypadFrequencyEntry
Dialog
ScanGroupSelect/Edit
Dialog
MessagePage
ConfigurationMenu
RepeaterMode
PresetChannels
ScanGroups
EncryptionKeys
System
TacticalModeView
ATCModeView
Figure 2 Display Page Tree Structure
6.2 POWER ON
If aircraft power is removed while the PMR is in operation, the PMR shall automatically turn on upon
reapplication of aircraft power. If the PMR is not in operation (turned off) when aircraft power is
removed, the PMR shall remain off when aircraft power is restored, and shall only turn on when an
operator presses the “ON” button.
Upon power up, the PMR shall display a “boot” screen while system initialization is taking place. This
should take less than 30 seconds, which is the amount of time specified for the transceiver modules to
come up fully. Figure 3 depicts the boot screen. Note the software part number displayed near the
bottom of the screen. In addition, the hardware model number and firmware number shall be displayed.