User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 75 of 85
Figure 89 System-Configuration-Xcvr-Transceiver Page
Table 47 System-Configuration-Xcvr-Transceiver Page Actions
Event Action
RT1 button pressed
Select transceiver 1 and invoke System-Configuration-Xcvr-Action
page.
RT2 button pressed
Select transceiver 2 and invoke System-Configuration-Xcvr-Action
page.
RT3 button pressed
Select transceiver 3 and invoke System-Configuration-Xcvr-Action
page.
HOME key pressed Return to Home page.
The System-Configuration-Xcvr-Action page shall allow the operator to start and stop the transceiver
configuration operation. Starting the operation implies configuring the signals connected to the
transceiver such that an external application can communicate with the transceiver. The page is
depicted in Figure 90 and the page’s Action/Event table is contained in Table 48.
When the page is first loaded, the operation shall be considered in the Idle state and the Stop button
shall be invisible or disabled. When the configuration operation is underway, the Start button shall be
invisible or disabled.