User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 74 of 85
Figure 88 Encryption-Key-Erase-Action Page
Table 46 Encryption-Key-Erase-Action Page Actions
Event Action
Start button pressed
Execute key erase operation. Disable Start button. Hide or
disable BACK button.
Key erase completed
Hide Start button. Show Complete indicator. Show or enable
BACK button.
BACK key pressed Invoke Encryption-Key-Erase-Transceiver page.
HOME key pressed
Return to Encryption-Key-Function page. Sound error tone and
ignore button press if key erase operation is underway.
6.4.2.11 Configure Transceiver
The System-Configuration-Xcvr pages shall allow the operator to load a transceiver’s configuration via
an external tool, such as Motorola CPS or Cobham FCT.
The first page in the sequence shall be the System-Configuration-Xcvr-Transceiver page. This page
shall allow the operator to specify the transceiver for which the configuration will be loaded. Only
transceivers installed in the system shall be selectable. The page is depicted in Figure 89 and the page’s
Action/Event table is contained in Table 47.