User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 72 of 85
Figure 85 Encryption-Key-Fill-Transceiver Page
Table 43 Encryption-Key-Fill-Transceiver Page Actions
Event Action
RT1 button pressed Select transceiver 1 and invoke Encryption-Key-Fill-Action page.
RT2 button pressed Select transceiver 2 and invoke Encryption-Key-Fill-Action page.
RT3 button pressed Select transceiver 3 and invoke Encryption-Key-Fill-Action page.
BACK key pressed Invoke Encryption-Key-Function page.
NEXT key pressed
Select focused transceiver and invoke Encryption-Key-Fill-Action
page.
HOME key pressed Return to Encryption-Key-Function page.
The Encryption-Key-Fill-Action page shall allow the operator to start and stop the key fill operation.
Starting the operation implies configuring the key fill lines connected to the transceiver such that an
external key fill device can communicate with the transceiver. The page is depicted in Figure 86 and the
page’s Action/Event table is contained in Table 44.
When the page is first loaded, the operation shall be considered in the Idle state and the Stop button
shall be invisible or disabled. When the fill operation is underway, the Start button shall be invisible or
disabled.
Figure 86 Encryption-Key-Fill-Action Page
Table 44 Encryption-Key-Fill-Action Page Actions
Event Action
Start button pressed
Configure transceiver for key fill operation. Change state of
operation to Underway. Hide or disable Start button. Hide or
disable BACK button.
Stop button pressed
Configure transceiver for normal operation. Change state of
operation to Idle. Show or enable Start button. Show or enable
BACK button. Hide or disable Stop button.
BACK key pressed Invoke Encryption-Key-Fill-Transceiver page.
HOME key pressed
Return to Encryption-Key-Function page. Sound error tone and
ignore button press if key fill operation is underway.