User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 68 of 85
Figure 80 Scan-Group-Add-Confirm Page
Table 38 Scan-Group-Add-Confirm Page Actions
Event Action
BACK button pressed Invoke Scan-Group-Add-Channel-10 page.
SAVE button pressed Save scan group and invoke Scan-Group-Function page.
HOME key pressed Return to Scan-Group-Function page.
6.4.2.9.2 Change Scan Group
The Scan-Group-Change pages shall allow the operator to modify the properties of an existing scan
group in a transceiver’s scan group list. These pages are mostly the same as the “add scan group”
pages and will not be duplicated here. The differences from the “add scan group” pages are:
 The page titles shall be “Change Scan Group” rather than “Add Scan Group”.
 The Scan-Group-Add-Number page shall limit selection of scan groups to those that are
programmed rather than those that are not programmed.
 Scan groups for Motorola modules can be changed.
6.4.2.9.3 Delete Scan Group
The Scan-Group-Delete pages shall allow the operator to remove an existing scan group from a
transceiver’s group list. The page sequence is given below.
The first page in the sequence shall be the Scan-Group- Delete-Transceiver page. This page shall allow
the operator to specify the transceiver from which the scan group will be deleted. Only transceivers
installed in the system shall be selectable. The page is depicted in Figure 81 and the page’s
Action/Event table is contained in Table 39.