User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 66 of 85
Figure 78 Scan-Group-Add-Channel-1 Page
Table 36 Scan-Group-Add-Channel-1 Page Actions
Event Action
Value-Up button pressed Increment preset channel.
Value-Down button pressed Decrement preset channel.
Tap digit thumbwheel Set preset channel to be value touched.
Slide digit thumbwheel to left Decrement preset channel.
Slide digit thumbwheel to right Increment preset channel.
Flick thumbwheel to left
Increment preset channel by value proportionate to
flick velocity. Should animate rotation through
channels if possible.
Flick thumbwheel to right
Decrement preset channel by value proportionate to
flick velocity. Should animate rotation through
channels if possible.
CLEAR button pressed Clear channel assignment and display N/A.
BACK button pressed Invoke Scan-Group-Add-Alpha page.
NEXT button pressed Invoke Scan-Group-Add-Channel-2 page.
HOME key pressed Return to Scan-Group-Function page.
There shall be 9 more pages like the Scan-Group-Add-Channel-1 Page for inputting a total of 10
channels into the group. Scan-Group-Add-Channel-2 thru Scan-Group-Add-Channel-10 will be skipped
for brevity.
The Scan-Group-Add-Priority-Channel page shall allow the operator to input the priority channel for the
scan group. Only programmed channels shall be selectable. The page is depicted in Figure 79 and the
page’s Action/Event table is contained in Table 37.