User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 64 of 85
Figure 76 Scan-Group-Add-Number Page
Table 34 Scan-Group-Add-Number Page Actions
Event Action
Value-Up button pressed Increment group number.
Value-Down button pressed Decrement group number.
Tap thumbwheel Set group number to be value touched.
Slide thumbwheel to left Decrement group number.
Slide thumbwheel to right Increment group number.
Flick digit thumbwheel to left
Increment group number by value proportionate to
flick velocity. Should animate rotation through
groups if possible.
Flick digit thumbwheel to right
Decrement group number by value proportionate to
flick velocity. Should animate rotation through
groups if possible.
BACK button pressed Invoke Scan-Group-Add-Transceiver page.
NEXT button pressed Invoke Scan-Group-Add-Properties page.
HOME key pressed Return to Scan-Group-Function page.
The Scan-Group-Add-Alpha page shall allow the operator to input the alphanumeric identifier of the scan
group. This value shall be a text string with a maximum length of 12 characters. The allowable
character set shall be the standard ASCII characters 32 thru 126. The page is depicted in Figure 77 and
the page’s Action/Event table is contained in Table 35.