User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 53 of 85
Table 23 Preset-Channel-Encryption-Type Page Actions
Event Action
NONE button pressed
Select no encryption, not OTAR capable, and invoke Preset-
Channel-Receive-Audio-Phase page.
STD button pressed
Select standard encryption, not OTAR capable, and invoke
Preset- Channel-Encryption-Key page.
OTAR button pressed
Select standard encryption, OTAR capable, and invoke Preset-
Channel-Encryption-Key page.
Cursor-Right button pressed
Move focus to next location in a left-to-right, top-to-bottom
fashion.
Cursor-Left button pressed
Move focus to previous location in a right-to-left, bottom-to-top
fashion.
BACK button pressed

When channel type is AM or FM, invoke Preset-Channel-
Transmit-Power page.
 When channel type is P25, invoke Preset-Channel-Talk-
Group page.
NEXT button pressed

When “None” is selected, invoke Preset-Receive-Audio-
Phase page.
 When “OTAR” or “Standard” is selected, invoke Preset-
Channel-Encryption-Key page.
HOME key pressed Return to Preset-Channel-Function page.
The Preset-Channel-Encryption-Key page shall allow the operator to input the encryption key of the
channel. Valid values are 1-16. The page is depicted in Figure 61 and the page’s Action/Event table is
contained in Table 24.
Figure 61 Preset-Channel-Encryption-Key Page
Table 24 Preset-Channel-Encryption-Key Page Actions
Event Action
Value-Up button pressed Increment key.
Value-Down button pressed Decrement key.
Tap digit thumbwheel Set key to be value touched.