User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 51 of 85
Figure 58 Preset-Channel-Transmit-Power Page
Table 21 Preset-Channel-Transmit-Power Page Actions
Event Action
HI button pressed
Select high power and invoke :
 Preset-Channel-OTAR-Capability page when transceiver
is OTAR capable.

Preset-Channel-Receive-Bandwidth page otherwise.
LO button pressed
Select high power and invoke :
 Preset-Channel-OTAR-Capability page when transceiver
is OTAR capable.

Preset-Channel-Receive-Bandwidth page otherwise.
Cursor-Right button pressed
Move focus to next location in a left-to-right, top-to-bottom
fashion.
Cursor-Left button pressed
Move focus to previous location in a right-to-left, bottom-to-top
fashion.
BACK button pressed

When channel type is AM, invoke Preset-Channel-
Transmit-Frequency page.
 When channel type is FM, invoke Preset-Channel-
Transmit-Tone page.
 When channel type is P25, invoke Preset-Channel-
Transmit-NAC page.
NEXT button pressed

When channel type is AM or FM, invoke Preset-Channel-
Receive-Audio-Phase page.
 When channel type is P25, invoke Preset-Channel-Talk-
Group page.
HOME key pressed Return to Preset-Channel-Function page.
The Preset-Channel-Talk-Group page shall allow the operator to input the talk group of the channel.
Valid values are 0 thru 65535. The default shall be 65535. The page is depicted in Figure 59 and the
page’s Action/Event table is contained in Table 22.