User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 50 of 85
HOME key pressed Return to Preset-Channel-Function page.
The Preset-Channel-Transmit-NAC page shall allow the operator to input the transmit NAC code of the
channel. This value shall be a 3-digit hexadecimal number. The allowable character set shall be the
standard ASCII characters ‘0’ thru ‘9’ and ‘A’ thru ‘F’. The page is depicted in Figure 57 and the page’s
Action/Event table is contained in Table 20.
Figure 57 Preset-Channel-Transmit-NAC Page
Table 20 Preset-Channel-Transmit-NAC Page Actions
Event Action
Value-Up button pressed Increment focused digit.
Value-Down button pressed Decrement focused digit.
Right arrow button pressed Focus next (to right) digit.
Left arrow button pressed Focus previous (to left) digit.
Cursor-Right button pressed Focus next (to right) digit.
Cursor-Left button pressed Focus previous (to left) digit.
Tap digit thumbwheel Set focused digit to be value touched.
Slide digit thumbwheel to left Decrement focused digit.
Slide digit thumbwheel to right Increment focused digit.
Flick digit thumbwheel to left
Increment focused digit by value proportionate to
flick velocity. Should animate rotation through digits
if possible.
Flick digit thumbwheel to right
Decrement focused digit by value proportionate to
flick velocity. Should animate rotation through digits
if possible.
BACK button pressed Invoke Preset-Channel-Transmit-Frequency page.
NEXT button pressed Invoke Preset-Channel-Transmit-Power page.
HOME key pressed Return to Preset-Channel-Function page.
The Preset-Channel-Transmit-Power page shall allow the operator to input the transmit power of the
channel. Valid values are High and Low. The page is depicted in Figure 58 and the page’s Action/Event
table is contained in Table 21.