User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 44 of 85
Table 12 Preset-Channel-Number Page Actions
Event Action
Value-Up button pressed Select next (larger number) un-programmed channel.
Value-Down button pressed Select previous (smaller number) un-programmed channel.
Right slider button pressed Select next (larger number) un-programmed channel.
Left slider button pressed Select previous (smaller number) un-programmed channel.
Slider position moved
Select nearest un-programmed channel to relative position of
slider.
BACK button pressed Invoke Preset-Channel-Transceiver page.
NEXT button pressed Invoke Preset-Channel-Alpha page for selected channel.
HOME key pressed Return to Preset-Channel-Function page.
The Preset-Channel-Alpha page shall allow the operator to input the alphanumeric identifier of the
channel. This value shall be a text string with a maximum length of 12 characters. The allowable
character set shall be the standard ASCII characters 32 thru 126. The page is depicted in Figure 50 and
the page’s Action/Event table is contained in Table 13.
Figure 50 Preset-Channel-Alpha Page
Table 13 Preset-Channel-Alpha Page Actions
Event Action
Value-Up button pressed Increment focused character.
Value-Down button pressed Decrement focused character.
Right arrow button pressed Focus next (to right) character.
Left arrow button pressed Focus previous (to left) character.
Cursor-Right button pressed Focus next (to right) character.
Cursor-Left button pressed Focus previous (to left) character.
Touch character thumbwheel Set focused character to be value touched.
Slide character thumbwheel to left Decrement focused character.
Slide character thumbwheel to right Increment focused character.
Flick character thumbwheel to left
Increment focused character by value proportionate
to flick velocity. Should animate rotation through
characters if possible.
Flick character thumbwheel to right Decrement focused character by value proportionate