User's Manual
701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 34 of 85
Figure 35 Brightness Control Dialog
When the brightness knob is turned clockwise, the display brightness shall increase in intensity. When
the brightness knob is turned counterclockwise, the display brightness shall decrease in intensity. The
dialog shall disappear when no brightness knob activity has been present for more than 2 seconds.
6.4.2.2 Mode Selection Menu
The Mode-Selection-Menu dialog shall appear anytime the MENU button is pressed while the Home page
is active. This dialog shall allow the operator to select one of the PMR’s alternate modes of operation,
which are Relay, Simulcast, Message, Information, and Configuration. The Mode-Selection-Menu dialog
is depicted in Figure 36 and Table 5 contains the Event/Action table.
Figure 36 Mode-Selection-Menu Dialog
Table 5 Mode-Selection-Menu Dialog Actions
Event Action
Simulcast button pressed Invoke Simulcast-Configuration dialog.
Relay button pressed Invoke Relay-Configuration dialog.
Messages button pressed Invoke Messages dialog.